Underlayments
Met Shield High Temp UDL
OVERVIEW
Best-in-class Metshield® ice and water underlayment protects the roof structure from water seepage caused by ice dams and wind-driven rain. Designed specifically for high-temperature applications of metal roof installations, it will resist temperatures up to 250° without degradation of the adhesive, and self-seals around roofing nails, screws and clips used to install the primary roofing system. This high-tensile strength underlayment is a 40 mil SBS modified bitumen with a UV-resistant anti-slip polyethylene woven top facer and is required under all Tri-State Metals roof warranted systems.
IDEAL APPLICATION
Peel and Stick High Temp Underlayent
Met Shield Synthetic Underlayment
Tri-State Metals Inc proudly promotes and sells Metshield Synthetic Underlayment!
Metshield Synthetic, our premium synthetic roof underlayment, is among the safest, strongest, and best-performing roof underlayments on the market. It balances strength and weight, provides dynamic steep-slope traction, and will not buckle, warp or crack. Metshield Sythetic is rated for commercial and residential applications using plastic cap fasteners and roofing nails (3/8-inch head), and is an ideal underlayment for asphalt, shingles, metal, tile, slate, and a variety of sloped roofing materials. Skid-resistant surfaces and the proprietary textured surface make Metshield Sythetic, the best choice for steep slope applications. Whether you’re working on a Metshield Sythetic,-protected roof, or living underneath one, you’ll appreciate our quality.
Roll Size: 48″ x 250′ – 1,000SF
UV Exposure: 6 Months
Roofing Nails: Recommended
Plastic Cap Nails: Approved but not required
Met Carlisle Water & Ice Protection (WIP®)
Carlisle Water & Ice Shield (WIP) self-adhering roofing underlayments are designed to provide premium waterproofing protection for a variety of roofing and waterproofing applications.
WIP underlayments offer excellent protection against water and ice damming while withstanding some of Nature’s most unfavorable weather conditions. The self-adhering qualities of WIP underlayments reduce labor costs and installation times while providing increased protection compared to that of typical felt roofing underlayments.
WIP Underlayments:
- Protect roof structure & interior space from water infiltration caused by ice dams & wind-driven rain
- Resist cracking, drying and rotting, providing long-term waterproofing performance & low lifecycle cost
- Seal around roofing nails, staples and screws
- Can be used to ensure water-tightness at critical roof areas or as a covering for the entire roof to prevent moisture/water entry
- Split-release film provides fast & easy installation
- UL Classified
Click here to view the WIP 300HT Data Sheet
Best-in-class Metshield® ice and water underlayment protects the roof structure from water seepage caused by ice dams and wind-driven rain. Designed specifically for high-temperature applications of metal roof installations, it will resist temperatures up to 250° without degradation of the adhesive, and self-seals around roofing nails, screws and clips used to install the primary roofing system. This high-tensile strength underlayment is a 40 mil SBS modified bitumen with a UV-resistant anti-slip polyethylene woven top facer and is required under all Tri-State Metals roof warranted systems.
Tri-State Metals standard colors are produced by AkzoNobel and contain a minimum of 70% PVDF (Kynar500/Hylar5000) base resin with ceramic pigments. All colors are formulated to ensure consistent appearance, quality and long-term appearance.
Our Family of Product Warranties- Tri-State Metals Gold Standard 35 Year Non-Prorated Paint and System Warranty
- Tri-State Metals PVDF 35 Year Paint Warranty
- Tri-State Metals SMP 25 Year Paint Warranty
- Tri-State Metals PVDF 35 Year Paint and Aluminum Substrate Warranty
- Tri-State Metals International Paint Warranty
Why so many warranties? The answer is simple....there is not a “one size fits all” warranty.
The Gold Standard Warranty covers the entire Tri-State Metals system from the roof deck up and is offer exclusively through our network of fabricators and certified installers. Here are the benefits; If our product fails during the warranty period, Tri-State Metals will replace your roof at no cost to you and since your Tri-State Metals metal roof is a sensible investment, if you ever decide to sell your property we will transfer the warranty to the next owner(s) for the life of the warranty. For homeowners, its importnat to note that according to Remodeler Magazine you will recoup 85% of your initial investment upon the sale of your property.
Galvalume® Substrate:
Our steel products are painted over prime, made in the USA, Galvalume, AZ50 and is all Tension Leveled for superior flatness. Galvalume is an aluminum/zinc coated carbon steel product that was designed specifically for building products and contains approximately 80% aluminum in the coating by volume. Galvalume offers much better cut edge protection than traditional hot dipped galvanized products. It carries a 25 year warranty against perforation.
Aluminum Substrate:
Our aluminum products are painted over prime, made in the USA, aluminum. We use multiple alloys and tempers to ensure that the products supplied will meet and/or exceed your requirements. We are big fans of using our painted aluminum products for coastal applications and have invested a lot of R&D funds to ensure our aluminum roof systems meet and/or exceed the high wind requirements. Our painted aluminum in salt environments does carry a 25-year warranty, however there are annual maintenance requirements.
Drexlume® Substrate:
Drexlume is our version of mill finished Galvalume® with a two-sided, clear acrylic finish that is installed as a unpainted product. The clear acrylic is there to aid with roll forming and will weather away over time (no impact to the performance). Drexlume carries a 25-Year Non Pro-rated Drexlume Warranty (Acrylic Coated Galvalume)